| Categorise | Incremental Shaft model |
|---|
| Diameter | 40 mm dia. |
|---|
| Power supply voltage | 5 to 24 VDC (-5% to +15%) Ripple (p-p) 5% max. |
|---|
| Current consumption | 80 mA max. |
|---|
| Resolution | 1500 P/R |
|---|
| Inrush current | Approx. 9 A (0.3 ms) |
|---|
| Output phases | A, B and Z |
|---|
| Control output | Output type | NPN open collector |
|---|
| Load power supply voltage | 30 VDC max. |
|---|
| Load current | 35 mA max. (Sink current) |
|---|
| Residual voltage | 0.4 V max. (at sink current 35 mA) |
|---|
| Starting positional point | Supported |
|---|
| Max. response frequency | 100 kHz |
|---|
| Phase difference on output | 90±45 °between A and B (1/4 T ± 1/8 T) |
|---|
| Rise and fall times of output | 1 µs max. (Cable length: 2 m max., output voltage: 5 V, load resistance: 1 kΩ) |
|---|
| Starting torque | Room temperature: 0.98 mN.m max. |
|---|
| Moment of inertia | 1 x 10**-6 kg.m**2 max. |
|---|
| Shaft loading | Radial: 30 N
Thrust: 20 N |
|---|
| Max. permissible rotation | 6000 r/min |
|---|
| Protective circuit | Output short-cut protection
Power supply reverse polarity protection |
|---|
| Ambient temperature | Operating: -10 to 70℃
Storage: -25 to 85℃ |
|---|
| Ambient humidity | Operating: 35 to 85%
Storage: 35 to 85% |
|---|
| Insulation resistance | Between charged parts and the case: 20 MΩ min. (at 500 VDC) |
|---|
| Dielectric strength | Between charged parts and the case: 500 VAC 50/60 Hz 1 min |
|---|
| Vibration resistance | Destruction: 10 to 500 Hz, 2-mm or 150 m/s**2 double amplitude for 11 min 3 times each in X, Y, and Z directions |
|---|
| Shock resistance | Destruction: 1000 m/s**2 for 3 times each in X, Y, and Z directions |
|---|
| Degree of protection | IEC: IP50 |
|---|
| Connection method | Pre-wired models (Cable length: 0.5 m) |
|---|
| Material | Case: ABS
Main: Aluminum
Shaft: SUS420J2 |
|---|
| Weight | Package: Approx. 100 g |
|---|
| Accessories | Instruction manual,Couplings,Hex-head spanner |
|---|