| ategorise | Incremental Shaft model |
|---|
| Diameter | 50 mm dia. |
|---|
| Power supply voltage | 5 VDC ±5% ripple (p-p) 5% max. |
|---|
| Current consumption | 160 mA max. |
|---|
| Resolution | 500 P/R |
|---|
| Inrush current | Approx. 9 A (0.3 ms) |
|---|
| Output phases | A, -A, B, -B, Z and -Z |
|---|
| Control output | Output type | Line driver output |
|---|
| Output voltage | Vo: 2.5 V min.
Vs: 0.5 V max |
|---|
| Load current | High level (Io): -20 mA
Low level (Is): 20 mA |
|---|
| Starting positional point | Supported |
|---|
| Max. response frequency | 100 kHz |
|---|
| Phase difference on output | 90±45 °between A and B (1/4 T ± 1/8 T) |
|---|
| Rise and fall times of output | 0.1 µs max. (Cable length: 2 m max., Io = -20 mA, Is = 20 mA) |
|---|
| Starting torque | Room temperature: 10 mN.m max. |
|---|
| Moment of inertia | 3 x 10**-7 kg.m**2 max. |
|---|
| Shaft loading | Radial: 50 N
Thrust: 30 N |
|---|
| Max. permissible rotation | 6000 r/min |
|---|
| Ambient temperature | Operating: -10 to 70℃
Storage: -25 to 85℃ |
|---|
| Ambient humidity | Operating: 35 to 85%
Storage: 35 to 85% |
|---|
| Insulation resistance | Between charged parts and the case: 100 MΩ min. (at 500 VDC) |
|---|
| Dielectric strength | Between charged parts and the case: 500 VAC 50/60 Hz 1 min |
|---|
| Vibration resistance | Destruction: 10 to 500 Hz, 2-mm or 150 m/s**2 double amplitude for 11 min 3 times each in X, Y, and Z directions |
|---|
| Shock resistance | Destruction: 1000 m/s**2 for 3 times each in X, Y, and Z directions |
|---|
| Degree of protection | IEC: IP64
Company standard: Oil resistance |
|---|
| Connection method | Pre-wired models (Cable length: 2 m) |
|---|
| Material | Case: Zinc alloy
Main: Aluminum
Shaft: SUS420J2 |
|---|
| Weight | Package: Approx. 400 g |
|---|
| Accessories | Instruction manual |
|---|